Steel and Rebar Testing

MATLAB Materials Laboratory provides mechanical testing of steel in Cambodia: tensile, yield, elongation and bend tests on reinforcing bar from 6 to 50 mm, proof and tensile tests on mechanical couplers and prestressing strand, tensile and shear tests on anchor and connection bolts, and tensile tests on plate, tube and rolled sections.

Results are reported against the grade your project specifies, whether ASTM A615, ISO 15630-1, JIS or GB/T, so a rebar delivery from any supplier can be accepted or rejected on the same day the samples arrive. Weld quality and installed steelwork are inspected on site by our NDT team.

Reinforcement and strand

TestMethod
Rebar tensile, 6 to 50 mmASTM A370 / ISO 15630-1
Yield, tensile strength, elongationASTM A370 / A615
Bend and re-bend testASTM A370 / ISO 15630-1
Mechanical coupler and welded jointISO 15835 / ASTM A1034
Seven-wire strand, 12.7 to 15.6 mmASTM A1061 / A416

Bolts and structural steel

TestMethod
Anchor bolt tensile, with / without nutASTM F606
Connection bolt tensileASTM F606 / F3125
Single shear test of boltASTM F606
Plate, tube, I/H/C-section tensileASTM A370 / ISO 6892-1
Galvanised steel tensileASTM A370 / ISO 6892-1
Torque wrench calibrationISO 6789

Who uses this service

Contractors verifying rebar deliveries per batch, steel traders and importers certifying stock, precast and prestressing yards, and structural consultants accepting couplers and anchors.

Why contractors and consultants choose MATLAB

  • Rebar from 6 to 50 mm, strand 12.7 to 15.6 mm, bolts and structural sections on one price schedule.
  • Batch testing rates for repeat deliveries.
  • Torque wrench calibration to ISO 6789 for bolting crews.

Frequently asked questions

How many rebar samples are needed per delivery?

Most specifications call for one set of samples per bar size per heat number or per defined tonnage. Send us the specification clause and we will confirm the sampling plan and price.

What does a rebar tensile test report show?

Yield strength, ultimate tensile strength, elongation and the yield-to-tensile ratio, compared with the grade limits of ASTM A615, ISO 15630-1 or the standard you nominate, plus the bend or re-bend result.

Do you test mechanical couplers?

Yes, to ISO 15835 or ASTM A1034, including tensile tests on spliced bars.

Can you test anchor bolts and structural bolts?

Yes: anchor bolt tensile with and without nut, connection bolt tensile and single shear to ASTM F606 and F3125.