NDT and Structural Inspection
MATLAB Materials Laboratory provides non-destructive testing (NDT) of concrete and steel, structural inspection and pile testing in Cambodia. Our field teams assess existing buildings, new structures and foundations without damaging them: rebound hammer and ultrasonic pulse velocity surveys, carbonation and cover meter mapping, pull-out and pull-off tests, magnetic particle, dye penetrant, ultrasonic and visual testing of welds, pile integrity testing and cross-hole sonic logging.
Work is reported to ASTM, BS EN, ISO and AWS D1.1 acceptance criteria and can be combined with core sampling and laboratory strength testing for a complete condition assessment. Recent work includes magnetic particle testing of 51 welded structural-steel connections at the Wing Bank SR project.



Concrete NDT and adhesion
| Test | Method |
|---|---|
| Rebound hammer | ASTM C805 / BS EN 12504-2 |
| Ultrasonic pulse velocity (UPV) | ASTM C597 / BS EN 12504-4 |
| Carbonation depth | BS EN 14630 |
| Rebar locator / cover meter | BS 1881-204 |
| Pull-out test, anchor or rebar | ASTM E488 |
| Pull-off adhesion, concrete and coatings | ASTM C1583 / D4541 |
Steel, welds and piles
| Test | Method |
|---|---|
| Magnetic particle testing (MT) | ASTM E709 / ISO 17638 |
| Dye penetrant testing (PT) | ASTM E165 / ISO 3452-1 |
| Ultrasonic testing (UT) | ASTM E164 / ISO 17640 |
| Visual testing (VT) | AWS D1.1 / ISO 17637 |
| Ultrasonic thickness gauging | ASTM E797 |
| Pile integrity test (PIT) | ASTM D5882 |
| Pile dynamic analysis (PDA) | ASTM D4945 |
| Cross-hole sonic logging (CSL) | ASTM D6760 |
Who uses this service
Steel fabricators and erectors needing weld acceptance, piling contractors proving shaft integrity, building owners and insurers assessing existing structures, and consultants investigating defects or change of use.
Why contractors and consultants choose MATLAB
- Concrete NDT, weld NDT and pile integrity from one mobilisation, nationwide.
- Cores and samples taken during the survey go straight to our own laboratory.
- Reports written for structural engineers, insurers and owners, with marked-up drawings.
Frequently asked questions
What is a pile integrity test?
The low-strain pile integrity test (PIT, ASTM D5882) detects defects, necking and length anomalies in cast-in-place piles from the pile head. For large-diameter bored piles we also offer cross-hole sonic logging (CSL, ASTM D6760) through pre-installed access tubes.
Can you check the strength of an existing concrete building?
Yes. We combine rebound hammer and ultrasonic pulse velocity surveys with calibration cores, carbonation depth and cover meter mapping to estimate in-place strength and durability.
Which weld tests do you perform?
Visual testing to AWS D1.1, magnetic particle testing (MT), dye penetrant testing (PT) and ultrasonic testing (UT) on structural steel welds, on site or in the fabrication shop.
Do you inspect buildings outside Phnom Penh?
Yes. Teams mobilise nationwide; mobilisation is priced by distance band up to 600 km.